---
title: Cloud Printer (Star Micronics)
slug: cloud-printer-star-micronics
docTags: 
createdAt: 2024-11-18T11:24:08.212Z
---

There are two methods available for connecting a Star Micronics Cloud Printer to your store. Both methods achieve the same result, so you can choose the one that best suits your setup and device availability.

***

# Method 1: Configure Using the Star Quick Setup Utility (Recommended)

This is the recommended approach for configuring your Star Micronics printer.

## Prerequisites

Before you begin, ensure that:

- The printer is connected to your network using an **Ethernet cable**. 
- Your **iPhone** and the printer are connected to the **same network**. 
- The **Star Quick Setup Utility** app is installed from the App Store/Play Store



## Step 1: Install the Star Quick Setup Utility

Download and install the **Star Quick Setup Utility** from the Apple App Store.

::Image[]{src="https://api.archbee.com/api/optimize/A6k4A417O1V2DGm4H5kN0/LEb4j1wUvpu-ZOr8etqbZ_image.png" size="40" isUploading="false" width="337" height="720" darkWidth="337" darkHeight="720" showCaption="false"}



## Step 2: Connect to Your Printer

- Open the **Star Quick Setup Utility** app. 
- Select your printer from the available devices. 
- Allow all requested permissions. 
- Once connected, the app will display your printer's **Ethernet IP Address**. 

::Image[]{src="https://api.archbee.com/api/optimize/A6k4A417O1V2DGm4H5kN0/MjbjZvVmlgqDEQd4kfBaV_image.png" size="40" isUploading="false" width="349" height="719" darkWidth="349" darkHeight="719" showCaption="false"}

**

## Step 3: Open CloudPRNT Settings

Navigate to: **Printer Settings > Star CloudPRNT Settings**

::Image[]{src="https://api.archbee.com/api/optimize/A6k4A417O1V2DGm4H5kN0/Qv48gXdGWMifuFJyO4hWd_image.png" size="40" isUploading="false" width="340" height="720" darkWidth="340" darkHeight="720" showCaption="false"}

**

## Step 4: Configure the CloudPRNT Settings

Enter the following values:

- Enable the **CloudPRNT Service** toggle.
- **Server URL:** Paste your CloudPRNT Server URL. 
- **Polling Time:** 5 Seconds 
- **HTTP Response Timeout:** 60 Seconds 

::Image[]{src="https://api.archbee.com/api/optimize/A6k4A417O1V2DGm4H5kN0/KSwsrgDnyacQNNU8u8SHF_image.png" size="40" isUploading="false" width="346" height="720" darkWidth="346" darkHeight="720" showCaption="false"}

**

## Step 5: Obtain the Server URL

To copy your CloudPRNT Server URL:

- Open the **Merchant Panel**. 
- Navigate to: **Settings > Apps > Thermal Printer** 
- Enable the **Cloud Printer** option. 
- Click the **Settings** icon. 
- Copy the generated **Server URL**. 
- Paste this URL into the **Star Quick Setup Utility**. 



![](https://api.archbee.com/api/optimize/A6k4A417O1V2DGm4H5kN0/02FiHGFOqvEBeAAc21s1j_image.png)



## Step 6: Save the Configuration

Save the settings within the app.

Your printer is now ready to receive CloudPRNT print requests.

***

# Method 2: Configure Through the Printer Web Interface

If you prefer not to use the mobile application, you can configure the printer directly using its web interface.



### Step 1: Install the Printer Driver 

1. **Identify Your Printer Model:** Ensure you have the correct driver for your specific printer model.
2. **Download the Driver:** Visit the [Star Micronics Support Page](https://starmicronics.com/support/) to download the necessary driver for your device.
3. **Install the Driver:** Follow the on-screen instructions to complete the installation.

### Step 2: Connect Your Printer to the Network 

1. **Network Setup:** Connect both your computer and the printer to the same network.
2. **Find the Printer's MAC Address:** Once connected, obtain the printer's MAC address as shown in the image below.



![](https://api.archbee.com/api/optimize/A6k4A417O1V2DGm4H5kN0/-PlbQkJugLpLTqKJxp957_image.png)

### Step 3: Register Hyperzod Cloud Printer Server URL 

- **Set Printer IP Address:** Click on the "Set Printer IP Address" button to configure your printer settings.
- **Login Credentials:** Use the default credentials to log in:
  - **Username:** root
  - **Password:** public

![](https://api.archbee.com/api/optimize/A6k4A417O1V2DGm4H5kN0/2eHDeATPhx3wPcdxws73N_image.png)

**Register Hyperzod Cloud Printer Server:** Click on the "CloudPRNT" button to set up the server URL. This button is visible in the image below.

You can find the server URL 

Go to merchant panel -> Apps -> Thermal Printer -> Star Micronics -> Click on setting icon -> copy server URL

### Step 4: Enable CloudPRNT Service 

1. **Enable CloudPRNT:** Make sure the CloudPRNT Service is enabled as shown in the image below.



![](https://api.archbee.com/api/optimize/A6k4A417O1V2DGm4H5kN0/ft23YHafTZ3SNWWuPdr8s_image-1.png)

**Save and Submit:**

 Click "Submit" to save the settings. Your cloud printer is now ready to use. 

:::hint{type="warning"}
**Note:** If you have any issues installing the driver, please connect star micronic support team-[https://starmicronics.com/star-micronics-technical-support](https://starmicronics.com/star-micronics-technical-support)
:::

****